Products and Solutions
Search here for your equipment, requirement for curriculum or product Solutions:
FT Series Industrial Processing & Food Technology
Educational – BE Series Biochemical Engineering, C Series Advanced Fluid mechanics, CE Series Chemical Engineering, CM Series Internal Combustion Engines, EF Series Engineering Fundamentals, F Series Fluid Mechanics, FS Series Fluid Science, FE Series Irrigation Water Management, FM Series Fans and Compressors, H Series Manometers, Pitot Tubes, Probes, HT Series Heat Transfer, ME Series Machine Elements, PCT Series Process Control, RA Series Refrigeration & Air Conditioning, RE Series Renewable Energy, S Series Applied Hydraulics and Hydrology, ST Series Structural Engineering, SV Series Statics & Vibrations, TH Series Thermodynamics, UOP Unit Operations, W Series Water Treatment.
armBUS Hardware/Software Control & Acquisition Systems, armSOFT Control & Acquisition Systems Software.
Distance Learning – Computer Control & Remote Access Information.
- Armfield Beverages Equipment
- Armfield Dairy
- Armfield Edible and Essential Oils
- Armfield Educational Food Technology
- Armfield Flavours and Fragrances
- Armfield Ingredients
- Armfield Liquid Foods
- Armfield Nutraceuticals
- Armfield Pharmaceuticals
- IFT Series - Industrial Food Technology
- FT2 Hammer-Beater Mill
- FT25X Modular Scraped Surface Heat Exchanger Systems
- FT5 Ribbon and Cone Blender
- FT14 Plate and Frame Filter Press
- FT15 Disc Bowl Centrifuge
- FT17 Cross Flow Membrane Filtration
- FT18 Modular Cross Flow Filtration
- FT19 Autoclave
- FT20 Cheese Vat
- FT21/21A-Butter Churn and Butter Making Accessories
- FT22 Rising Film Evaporator
- FT27 CentriPeel Centrifuge
- FT28 Oil Extraction Screw Press
- FT29 Batch Solvent Extraction and Desolventising Unit
- FT30-MKIII Spray Dryer
- FT31 Laboratory Fluid Bed Dryer
- FT32 Drum Dryer
- FT33MkII Vacuum Freeze Dryer
- FT34MKII Contact Plate Freezer
- FT36 Blast Freezer
- FT43 Laboratory Pasteuriser
- FT51 Continuous In-line Deaerator
- FT52-CIP Unit
- FT63 Laboratory Process Chiller
- FT64 Laboratory Process Chiller
- FT66 Neutraliser/Washer/Bleacher
- FT67 Hydrogenation Unit
- FT68 Deodorising Unit
- FT74XA HTST/UHT System
- FT75 Laboratory Pasteuriser
- FT80/FT81 Tall Form Spray Dryer and Chiller
- FT83XA Sterile Filling System
- FT84-12 Microwave UHT add-on
- FT85 Sterile Vessel
- FT90 Homogenisation Sub-Systems
- FT91 Homogenisation SubSystem
- FT94LT HTST/UHT Mini Pilot System
- FT94X HTST/UHT Mini Pilot System
- FT102LT - Carbonator Filler
- FT102X-FT104X Carbonator/Filler/Capper
- FT102XA
- FT110DP Rapid Extractor
- FT111X - Laboratory-Scale Rapid Extractor
- FT140X - Mixing vessels
- FT141 Multifunction Laboratory Mixer - FT142 Multifunction Laboratory Mixer UHT
- FT174 HTST/UHT Process System
- BE Series - Biochemical Engineering
- BE1 Batch Enzyme Reactor
- BE2 Chromatography Unit
- BE3 Anaerobic Column Reactor
- BE4 Anaerobic Tank Reactor
- C Series - Advanced Fluid Mechanics
- C1-MKII - Compressible Flow Unit
- C2 - Subsonic Wind Tunnel
- C3-MKII - Multi-Pump Test Rig
- C4-MKII - Multi-Purpose Teaching Flume
- C6-MKII-10 - Fluid Friction Measurements
- C7 MkII - Pipe Surge And Water Hammer Apparatus
- C9 - Flow Meter Demonstration Unit
- C9-MKII Flowmeter Demonstrator
- C10 - Laminar Flow Table
- C11 MkII - Pipe Networks
- C15 - Computer Controlled Subsonic Wind Tunnel
- C16 - Hydrogen Bubble Flow Visualisation System
- C30 – Subsonic Wind Tunnel
- CA Series - Control and Acquisition Systems
- CA - armSOFT Control & Acquisition
- CE Series - Chemical Engineering
- CEB-MKIII Transparent batch reactor
- CEK MKII - Fluid Mixing Studies
- CEL-MKII Fixed and Fluidised Bed Apparatus
- CEM-MKII Continuous stirred tank reactor (CSTR)
- CEN-MKII - Solids Handling Studies
- CEP-MKII - Stirred Tank Reactors in Series
- CEQ - Corrosion Studies Kit
- CERa-MKII - Gaseous Diffusion Coefficient Apparatus
- CERb - Liquid Diffusion Coefficient Apparatus
- CES - Wetted Wall Gas Absorption Column
- CET-MKII Tubular reactor
- CEU - Catalytic Reactors
- CEXC – Chemical Reactors Teaching Equipment - Service Unit
- CEY Laminar flow reactor
- CEZ Plug flow reactor
- CM Series - Internal Combustion Engine
- CM14 Axial Flow Gas Turbine
- CM11-MKII - Gasoline Engine
- CM12 - Automotive Diesel Engine
- CM20 - Single-Cylinder Combustion Engine
- Distance Learning and Remote Access
- EF Series - Engineering Fundamentals
- EF-WS Workstation
- EFK1-MKII Statics
- EFK2 Materials Testing Kit
- EFK3 Simple Machines Kit
- EFK4 Mechanisms Kit
- EFK5 Vibration, Friction & Energy
- EFK6 Engineering Fundamentals Complete Kit
- FS-SU Fluid Science Service Unit
- F1 Series Fluid Mechanics
- armSOFT Software F1-aBASIC
- F1-10 Hydraulics Bench
- F1-11 - Dead Weight Pressure Gauge Calibrator
- F1-12-MKII Hydrostatic Pressure
- F1-13-MKII Flow Over Weir
- F1-14 - Metacentric Height
- F1-15-MKII Bernoulli's Theorem Demonstration
- F1-16-MKII Impact of a Jet
- F1-17 Orifice and Free Jet Flow
- F1-17a Orifice Discharge
- F1-18 Energy Losses in Pipes
- F1-19 Flow Channel
- F1-20 - Osborne Reynolds Demonstration
- F1-21-MKII Flow Meter Demonstration
- F1-22-MKII Energy Losses in Bends and Fittings
- F1-23 - Free and Forced Vortex
- F1-24 - Hydraulic Ram
- F1-25-MKII - Demonstration Pelton Turbine
- F1-27 - Centrifugal Pump Characteristics
- F1-28 - Cavitation Demonstration
- F1-29 - Fluid Statics and Manometry
- F1-30 Fluid properties apparatus
- F1-31 Pascal’s Apparatus
- F1-32 Francis Turbine
- F1-33 - Pitot Tube Demonstrator
- F1-35 Series and Parallel Pumps
- F1-38 Hele Shaw Apparatus
- F4 - Precision Pressure Gauge Calibrator
- F5 - Osborne Reynolds’ Apparatus
- F6 - Air Flow Studies
- F12 - Particle drag coefficients
- F9092 - Fluid Properties & Hydrostatics Bench
- FE Series - Irrigation Water Management
- FEL4 - Soil Moisture Suction Sand Table
- FEL5-MKII - Demonstration Infiltration Apparatus
- FEL6 - Demonstration Lysimeter
- FEL10 - Drain Permeameter
- FEX26-1/2/3 - Parshall Flumes
- FEX26-4/5/6 - Washington State College (WSC) Flumes
- FEX26-7 - Thin Plate Weirs & Accessories
- FEX26-8 – Stilling Well and Depth Gauge
- FEX26-9 – Channel Section
- FEX26-10 – Broad Crested Weir
- FEX26-11 – Crump Weir
- FEX40-3/4 – Sluice Gates
- FEX40-5/6/7 – Automatic Water Control Gates
- FM Series - Fans and Compressors
- FM40 - Centrifugal Fan Demonstration Unit
- FM51 - Series and Parrallel Pumps Demonstration
- FM52 - Gear Pump Demonstration Unit
- FM53 - Plunger Pump Demonstration Unit
- FM60 - Impulse Turbine
- FM61 - Reaction Turbine
- FM62-Pelton-Turbines
- FM63 – Propeller Turbine
- FM64 - Pump Test Accessory
- FS Series- Fluid Science
- FS-1.1 Fluid Science Flow Measurement
- FS-1.2 Energy Losses in Straight Pipes
- FS-1.3 Energy Losses in Bends
- FS-2.1 - Fluid Science Manometer - Inclined
- FS-2.2 - Fluid Science Manometer – U Tube
- FS-3.1 - Fluid Science Shell and Tube Heat
- FS-3.2 - Fluid Science Tubular Exchanger
- FS-3.3 - Fluid Science Cross Flow
- FS-3.4 - Fluid Science Plate
- FS-4.1 Fluid Science Fluidised Bed
- FS-5.1 Flow Visualisation
- FT Series - Educational Food Technology
- H Series - Hydraulic Instruments
- H1-7 – H1-8 - Digital Hook & Point Gauges
- H1-10 H1-11 - Tripod Stand
- H12-8 - Portable Pressure Meter
- H12-9 - Portable Pressure Meter
- H12 - Liquid Manometers & Meters
- H14/2 - Computer compatible manometer bank
- H30 Pitot Tubes
- H33/H33-10 - Propeller Velocity Flowmeter
- H40-MKII - Wave Probe System
- H41 - Laser PIV System
- HT Series - Computer Controlled Heat Exchange / Heat Transfer
- HT10X Service Unit And Heat Transfer Accessories
- HT10X – Computer Controlled Heat Transfer Service Unit
- HT11X – Linear Heat Conduction
- HT12X – Radial Heat Conduction
- HT13X – Laws of Radiant Heat Transfer and Radiant Heat Exchange
- HT14X – Combined Convection and Radiation
- HT15X – Extended Surface Heat Exchanger
- HT16X – Radiation Errors in Temperature Measurement
- HT17X – Unsteady-State Heat Transfer
- HT18X – Thermo-Electric Heat Pump
- HT19X – Free and Forced Convection
- HT20X – Conductivity of Liquids and Gases
- HT10XC Computer Controlled Heat Transfer Teaching Equipment
- HT11 – Linear Heat Conduction
- HT12 – Radial Heat Conduction
- HT13 – Laws of Radiant Heat Transfer and Radiant Heat Exchange
- HT14 - Combined Convection and Radiation
- HT15 - Extended Surface Heat Exchanger
- HT16 - Radiation Errors in Temperature Measurement
- HT17 - Unsteady-State Heat Transfer
- HT18C - Thermo-Electric Heat Pump
- HT19C - Free and Forced Convection
- HT20 - Conductivity of Liquids and Gases
- HT30X Service Unit Heat Exchange Accessories
- HT30X-Computer Controlled Heat Exchanger Service Unit
- HT31X-Tubular Heat Exchanger
- HT32X - Plate Heat Exchanger
- HT33X-Shell and Tube Heat Exchanger
- HT30XC Service Unit And Heat Transfer Accessories
- HT30XC - Computer Controlled Heat Exchanger Service Module
- HT31 – Tubular Heat Exchanger
- HT32 – Plate Heat Exchanger
- HT33 – Shell and Tube Heat Exchanger
- HT34 – Jacketed Vessel With Coil & Stirrer
- HT35 – Cross Flow Heat Exchanger
- HT36 – Extended Tubular Heat Exchanger
- HT37 – Extended Reconfigurable Heat Exchanger
- MAM Series - Mechanical & Automotive Mechanisms
- DT-9.06 Geneva Stop
- DT-9.07 Oldham Coupling
- DT-9.08 Hooke's Joint
- DT-9.09 Cam & Follower
- DT-9.10 Gear Generation Apparatus
- SD-1.10 Universal Bench Mounted Frame
- SD-1.12 Drum Brake Apparatus
- SD-1.15 Gearbox Apparatus
- SD-1.17 - Overdrive Apparatus
- SD-417/-1.18 Epicyclic Gear Units
- SD-1.18 - Braking & Accelerating Forces Apparatus
- SD-1.20 - Belt Friction Apparatus
- SD-1.22 - Borg-Warner Automatic Transmission Simulator
- SD-1.23 Static & Dynamic Balancing Apparatus
- SD-1.24-Plate Clutch Apparatus
- SD-1.25-Disc Brake Apparatus
- SD-1.27-Simple Hydraulic System
- SD-1.28 Crank Mechanism
- SD-4.15 Acceleration of geared systems
- SD-1.16A Gearbox Apparatus
- ME Series - Machine Elements Series
- ME Series - Cutaway Valves
- ME Series - Cutaway Pumps
- ME Series - Machine Elements - Transparent Process Demonstrators
- ME51 - Steam Turbines
- NA Series - Naval Architecture
- PCT Series - Process Control Teaching System
- PCT23MKII - Process Plant Trainer
- PCT55 - Programmable Logic Controller
- PCT56 – Sensor Conditioning and Calibration Trainer
- PCT60 - Level Control
- PCT61 - Flow Control
- PCT62 - Temperature Control
- PCT63 - Pressure Control
- PCT64 – Servo Pendulum
- RA Series - Refrigeration & Air Conditioning
- RA1-MKII-Computer controlled vapour-compression refrigeration unit
- RA2 - Computer Controlled Air Conditioning Unit
- RA3 Recirculating Air Conditioning Unit
- RA4 - Air-Conditioning Training Unit
- RE Series - Renewable Energy
- EF-6.1 – Photovoltaic Energy
- EF-6.2 -Wind Energy
- EF-6.4 – Hydrogen Fuel Cell Technology
- EF-6.5 – Biomass Fuel Technology
- EF-6.6 – Battery Technology Kit
- EF-6.7 – Renewable Energy
- RE10 - Photovoltaic Energy
- RE12 Wind Energy
- RE14 Fuel Cell Technology
- RE16 Thermal Energy
- RE18 Smart Grid Technology
- RE20 Biofuel
- RE22 Bio Energy
- RE24 Battery Technology
- S Series - Applied Hydraulics & Hydrology
- FEL2 - Soil/Water Model Tank
- FEL3 - Rainfall Simulator
- S Series - Hydraulics & Hydrology
- S1 - Drainage and Seepage Tank
- S2 - Mobile Bed and Flow Visualisation Tanks
- S8-MKII - Sediment Transport Demonstration Channel
- S11 - Ground Water Flow Unit
- S16 - Hydraulic Flow Demonstrator
- S17 - River Flow Simulator
- S Series - Research Flume
- S60-S80-S100 Standard teaching and research flumes
- S10 - Rainfall Hydrographs
- S12 - Advanced Environmental Hydrology System
- S28- Sediment Erosion Flume
- ST Series - Structural Engineering
- ST Series - ST10/11 Structural Engineering
- SV Series - Statics & Vibrations
- DT-8.00 - Torsion of Bars Apparatus
- DT-8.01 - Strut Buckling Apparatus
- DT-8.02 Suspended Beam Apparatus
- DT-8.03 Two Hinged Arch Beam Apparatus
- DT-8.04 Portal Frame Apparatus
- DT-8.05 Deflection of Curved Bars Apparatus
- DT-8.06 Bending Moment & Shearing Force Apparatus
- SD-1.26 - Friction Apparatus
- SD-3.11 - Unsymmetrical Cantilever Apparatus
- SD-3.12 Universal Strut Apparatus
- SD-3.13 Beam Deflection Apparatus
- SD-3.50 Thin Cylinder Apparatus
- SD-4.00 Twist & Bends Testing Machine
- SD-4.13 Simple Vibration Apparatus
- SD-4.13A Free & Forced Vibration Apparatus
- SD-4.14 - Torsional Oscillations Apparatus
- SD-5.12 - Simple Balancing Apparatus
- SV - Friction
- SV900-Friction on an Inclined Plane
- SV901-Clutch Plate Friction Apparatus
- SV902-Pivot Friction Apparatus
- SV903 - Journal Friction Apparatus
- SV904 Bearing Friction Apparatus
- SV905 - Rope Belt Friction Apparatus
- SV906 - Friction of Belts Apparatus
- SV907 - Brake Drum Friction Apparatus
- SV - Theory of Machines
- SD-1.50 Wheel and Axle
- SD-1.51-Wheel and Differential Axle Apparatus
- SD-1.52-Efficiency of Screw Threads
- SD-1.53-Gear Tooth Form Apparatus
- SD-1.54-Cam and Follower Apparatus
- SD-1.55-Simple Flywheel
- SD-1.56-Epicyclic Gear Train
- SD-1.57-Castor Camber and King Pin Inclination
- SD-1.58-Relation Between Angular and Linear Speeds
- SD-1.59-Disc Brake Apparatus
- SD-1.60-Static & Dynamic Balancing Apparatus
- SD-1.61-Governor Apparatus
- SD-1.62-Gear Assembly Unit Combined Drives
- SD-1.63 Single Epicyclic Gear Train
- SD2-Universal Vibration System
- SV - Strength of Materials
- SV800 Rotating Fatigue Machine
- SV801 Unsymmetrical Cantilever Apparatus
- SV802 Torsion Testing Machine 30Nm
- SV803 Creep Testing Machine
- SV804 Pendulum Impact Tester 25J Impact Energy
- SV805 Universal Materials Tester 35kN
- SV807 Torsion & Deflection Testing Apparatus
- SV808 Extension of Springs Apparatus
- SV - Structures Series
- SV100 - Bench Mounted Frame
- SV101 – Structures Interface Unit
- SV200 - Pin-Jointed Frameworks (Roof and Warren Truss)
- SV201 - Redundant Truss
- SV203 - Deflection of Trusses
- SV202 - Deflection of Trusses
- SV300 - Combined Shear Force and Bending Moment Apparatus
- SV301 - Shear Force in a Beam
- SV302 - Bending Moments in a Beam
- SV303 - Deflection of Beams and Cantilevers
- SV304 - Equilibrium of Forces
- SV305 - Suspension Cable
- SV306 - Bending Stress in a Beam
- SV400 - Simple Suspension Bridge
- SV401 - Deflection of a Frame
- SV402 - Suspended centre Span bridge
- SV403 - Three-Pinned Arch
- SV404 - Two-Pinned Arch
- SV405 - Semi Circular Arch
- SV500 - Continuous and Indeterminate Beams
- SV501 - Plastic Bending of Beams
- SV502 - Plastic Bending of Portals
- SV503 - Deflection of Curved Bars
- SV600 - Buckling of Struts
- SV601 - Unsymmetrical Bending and Shear
- SV602 - Torsion of Rods and Tubes
- SV602 - Torsion of Rods and Tubes
- SV - Vibrations
- SD2 - Universal Vibration System
- SD3 - Torsional Vibration Apparatus
- TH Series – Thermodynamics
- TH1 - Temperature Measurement and Calibration
- TH2 - Pressure Measurement and Calibration
- TH3 - Saturation Pressure
- TH4 - Recycle Loops
- TH5 - Expansion Process of a Perfect Gas
- TH6 - Film and Dropwise Condensation Demonstration unit
- UOP Series - Unit Operations
- UOP3 - Distillation Columns
- UOP4 MKII - Solid/Liquid Extraction Unit
- UOP5 MKII - LIQUID/LIQUID EXTRACTION UNIT
- UOP6 MKII - Computer Controlled Water Cooling Tower
- UOP7 MKII - Gas Absorption Column
- UOP8-MkIIe Computer Controlled Tray Dryer
- UOP10 - Laboratory steam generator
- UOP12 - Filtration Unit
- UOP14-MKII - Crystallisation unit
- UOP15 - Fixed Bed Adsorption Unit
- UOP20X - Computer Controlled Modular Evaporator Series
- UOP30 - 3-Phase Horizontal Separator
- W Series - Water Treatment
- W1 Flocculation Test Unit
- W2 MKII Sedimentation Studies Apparatus
- W3 MKII Permeability - Fluidisation Studies Apparatus
- W4 MKII Filterability Apparatus
- W5 MKII Deep Bed Filter Column
- W7 MKII Model Sedimentation Tank
- W8 Anaerobic Digester
- W9 MKII Ion Exchange Unit
- W10 MKII Aeration Unit
- W11 Aerobic Digester
- Discipline / Sectors
- Aerospace
- Agricultural
- S12-MKII-50 – Advanced Environmental Hydrology System
- FEL3 – Rainfall Simulator
- FEL6 – Demonstration Lysimeter
- C4-MKII Multi-Purpose Teaching Flume
- F1-10 Hydraulics Bench
- F1-12-MKII Hydrostatic Pressure
- F1-13-MKII / F1-13a Flow Over Weir
- F1-15-MKII Bernoulli’s Theorem Demonstration
- F1-16-MKII Impact of a Jet
- F1-17a Orifice Discharge
- F1-19 Flow Channel
- CM20 – Single-Cylinder Combustion Engine
- FT74XA HTST/UHT System
- FT21 Butter Churn
- FT20 Cheese Vat & Cheese Making Accessories
- W3-MKII Permeability – Fluidisation Studies Apparatus
- W8 Anaerobic Digester
- W11 Aerobic Digester
- Chemical
- CEXC – Chemical Reactors Teaching Equipment – Service Unit
- CEL-MKII Fixed and Fluidised Bed Apparatus
- CERb – Liquid Diffusion Coefficient Apparatus
- CEU – Catalytic Reactors
- C6-MKII-10 – Fluid Friction Measurements
- UOP3 – Distillation Columns
- UOP5 MKII – Liquid / liquid Extraction Unit
- UOP7-MKII – Gas Absorption Column
- PCT40 Range – Multi-function Process Control Teaching System
- FM6X – Turbine Service Unit
- FT110DP Benchtop Rapid Extractor
- FT17 Cross Flow Membrane Filtration
- FS-4.1 Fluid Science Fluidised Bed
- Civil
- SV100 – Bench Mounted Frame
- S6-MKIII Standard teaching & research flume
- S8-MKII – Sediment Transport Demonstration Channel
- S11 – Ground Water Flow Unit
- S12-MKII-50 – Advanced Environmental Hydrology System
- S16 – Hydraulic Flow Demonstrator
- C4-MKII Multi-Purpose Teaching Flume
- C6-MKII-10 – Fluid Friction Measurements
- F1-10 Hydraulics Bench
- RA3 – Computer Controlled Recirculating Air Conditioning Unit
- FM40 – Centrifugal Fan Demonstration Unit
- FM41 Axial Fan Demonstration Unit
- FM42 Centrifugal Compressor Demonstration Unit
- FM50 – Centrifugal Pump Demonstration Unit
- FM51 – Series and Parallel Pumps Demonstration
- FM52 – Gear Pump Demonstration Unit
- FM53 – Plunger Pump Demonstration Unit
- Environmental
- S6-MKIII Standard teaching & research flume
- S8-MKII – Sediment Transport Demonstration Channel
- S11 – Ground Water Flow Unit
- S12-MKII-50 – Advanced Environmental Hydrology System
- S16 – Hydraulic Flow Demonstrator
- S17 – River Flow Simulator
- FEL3 – Rainfall Simulator
- FEL6 – Demonstration Lysimeter
- C4-MKII Multi-Purpose Teaching Flume
- RA3 – Computer Controlled Recirculating Air Conditioning Unit
- FT17 Cross Flow Membrane Filtration
- W3-MKII Permeability – Fluidisation Studies Apparatus
- W5 MKII Deep Bed Filter Column
- W7 MKII Model Sedimentation Tank
- W8 Anaerobic Digester
- W9-MKII Ion Exchange Unit
- W11 Aerobic Digester
- Geology & Geography
- S8-MKII – Sediment Transport Demonstration Channel
- S11 – Ground Water Flow Unit
- S16 – Hydraulic Flow Demonstrator
- S17 – River Flow Simulator
- FEL3 – Rainfall Simulator
- FEL6 – Demonstration Lysimeter
- W3-MKII Permeability – Fluidisation Studies Apparatus
- W5 MKII Deep Bed Filter Column
- W7 MKII Model Sedimentation Tank
- Marine
- Mechanical
- C6-MKII-10 – Fluid Friction Measurements
- C15 – Computer Controlled Subsonic Wind Tunnel
- C30 – Computer Controlled Wind Tunnel
- TH1 – Temperature Measurement and Calibration
- TH3 – Saturation Pressure
- RA1- MKII-Computer controlled vapour-compression refrigeration unit
- RA3 – Computer Controlled Recirculating Air Conditioning Unit
- CM20 – Single-Cylinder Combustion Engine
- FM51 – Series and Parallel Pumps Demonstration
- Educational
- BE Series - Biochemical Engineering
- C Series - Advanced Fluid Mechanics
- C3-MKII – Multi-Pump Test Rig
- C4-MKII Multi-Purpose Teaching Flume
- C6-MKII-10 – Fluid Friction Measurements
- C7-MkII Pipe Surge And Water Hammer Apparatus
- C9-MKII Flowmeter Demonstrator
- C10 – Laminar Flow Table
- C11-MkII Pipe Networks
- C15 – Computer Controlled Subsonic Wind Tunnel
- C30 – Computer Controlled Wind Tunnel
- CA Series - Control and Acquisition Systems
- CE Series - Chemical Engineering
- CEXC – Chemical Reactors Teaching Equipment – Service Unit
- CEB-MKIII Transparent batch reactor
- CEK MKII – Fluid Mixing Studies
- CEL-MKII Fixed and Fluidised Bed Apparatus
- CEM-MKII Continuous stirred tank reactor (CSTR)
- CEP-MKII – Stirred Tank Reactors in Series
- CEQ – Corrosion Studies Kit
- CERa-MKII – Gaseous Diffusion Coefficient Apparatus
- CERb – Liquid Diffusion Coefficient Apparatus
- CET-MKII Tubular reactor
- CEU – Catalytic Reactors
- CEY Plug flow reactor
- CEZ Laminar flow reactor
- CM Series - Internal Combustion Engine
- Distance Learning and Remote Access
- EF Series - Engineering Fundamentals
- F1 Series Fluid Mechanics
- armSOFT Software F1-aBASIC (included as standard with either of the hydraulic benches)
- F1-10 Hydraulics Bench
- F1-11 Dead Weight Calibrator
- F1-12-MKII Hydrostatic Pressure
- F1-13-MKII / F1-13a Flow Over Weir
- F1-14 MKII Metacentric Height
- F1-15-MKII Bernoulli’s Theorem Demonstration
- F1-16-MKII Impact of a Jet
- F1-17 Orifice and Free Jet Flow
- F1-17a Orifice Discharge
- F1-18-MKII Energy Losses in Pipes
- F1-19 Flow Channel
- F1-20 Osborne Reynolds’ Demonstration
- F1-21-MKII Flow Meter Demonstration
- F1-22-MKII Energy Losses in Bends and Fittings
- F1-23-MKII Free and Forced Vortices
- F1-24 Hydraulic Ram
- F1-25-MKII Demonstration Pelton Turbine
- F1-27 Centrifugal Pump Characteristics
- F1-28 Cavitation Demonstration
- F1-29 Fluid Statics and Manometry
- F1-30 Fluid Properties Apparatus
- F1-31 Pascal’s Apparatus
- F1-32 Francis Turbine
- F1-33 Pitot Tube Demonstrator
- F1-35 Series & Parallel Pumps
- F1-38 Hele Shaw Apparatus
- F12 – Particle drag coefficients
- F9092 – Fluid Properties & Hydrostatics Bench
- FE Series - Irrigation Water Management
- FM Series - Fans and Compressors
- FM40 – Centrifugal Fan Demonstration Unit
- FM41 Axial Fan Demonstration Unit
- FM42 Centrifugal Compressor Demonstration Unit
- FM51 – Series and Parallel Pumps Demonstration
- FM52 – Gear Pump Demonstration Unit
- FM53 – Plunger Pump Demonstration Unit
- FM6X – Turbine Service Unit
- FM60 – Impulse Turbine
- FM61 – Reaction Turbine
- FM62-Pelton-Turbine
- FM63 – Propeller Turbine
- FM64 – Pump Test Accessory
- FS Series- Fluid Science
- FS-SU Fluid Science Service Unit
- FS-1.1 Fluid Science Flow Measurement
- FS-1.2 Energy Losses in Straight Pipes
- FS-1.3 Energy Losses in Bends
- FS-2.1 – Fluid Science Manometer – Inclined
- FS-2.2 – Fluid Science Manometer – U Tube
- FS-3.1 – Fluid Science Shell and Tube Heat Exchanger
- FS-3.2 – Fluid Science Tubular Exchanger
- FS-3.3 – Fluid Science Cross Flow
- FS-3.4 – Fluid Science Plate Heat Exchanger
- FS-4.1 Fluid Science Fluidised Bed
- FS-5.1 Flow Visualiser
- FT Series - Educational Food Technology
- UOP10 – Laboratory steam generator
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT111X – Laboratory-Scale Rapid Extractor
- FT110DP Benchtop Rapid Extractor
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT80 Tall Form Spray Dryer
- FT75 Laboratory Pasteuriser
- FT68 Deodorising Unit
- FT67 Hydrogenation Unit
- FT66 Neutraliser/Washer/Bleacher
- FT63 Laboratory Process Chiller
- FT52 CIP Unit (Clean in Place)
- FT43 Laboratory Pasteuriser
- FT34MKII Contact Plate Freezer
- FT32 Laboratory Drum Dryer
- FT31 – Fluidised Bed Dryer
- FT30-MKIII Spray Dryer
- FT29 Batch Solvent Extraction and Desolventising Unit
- FT28 Oil Extraction Screw Press
- FT25XA Scraped Surface Heat Exchanger Series
- FT22 Rising Film Evaporator
- FT21 Butter Churn
- FT20 Cheese Vat & Cheese Making Accessories
- FT19 Autoclave
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT15 Disc Bowl Centrifuge
- FT14 Plate and Frame Filter Press
- FT5 Ribbon and Cone Blender
- FT2 Hammer/Beater Mill
- H Series - Hydraulic Instruments
- H1-1/H1-2/H1-3 – Vernier Hook & Point Gauges
- H1-7 – H1-8 – Digital Hook & Point Gauges
- H1-11 – Tripod Stand
- H12-1/H12-7 – Liquid Manometers & Meters
- H12-8 – Portable Pressure Meter
- H12-9 – Portable Pressure Meter
- H30 Pitot Tubes
- H33/H33-10 – Propeller Velocity Flowmeter
- H40-MKII – Wave Probe System
- HT Series - Computer Controlled Heat Exchange / Heat Transfer
- HT37X – Extended Reconfigurable Plate Heat Exchanger
- HT36X – Extended Tubular Heat Exchanger
- HT35X – Cross Flow Heat Exchanger
- HT34X – Jacketed Vessel With Coil And Stirrer
- HT33X – Shell and Tube Heat Exchanger
- HT32X – Plate Heat Exchanger
- HT31X – Tubular Heat Exchanger
- HT30X – Computer Controlled Heat Exchanger Service Unit
- HT10X – Computer Controlled Heat Transfer Service Unit
- HT11X – Linear Heat Conduction
- HT12X – Radial Heat Conduction
- HT13X – Laws of Radiant Heat Transfer and Radiant Heat Exchange
- HT14X – Combined Convection and Radiation
- HT15X – Extended Surface Heat Exchanger
- HT16X – Radiation Errors in Temperature Measurement
- HT17X – Unsteady-State Heat Transfer
- HT18X – Thermo-Electric Heat Pump
- HT19X – Free and Forced Convection
- HT20X – Conductivity of Liquids and Gases
- ME Series - Machine Elements Series
- NA Series - Naval Architecture
- PCT Series - Process Control Teaching System
- RA Series - Refrigeration & Air Conditioning
- RE Series - Renewable Energy
- S Series - Applied Hydraulics & Hydrology
- S1 – Drainage and Seepage Tank
- S2 – Mobile Bed and Flow Visualisation Tanks
- S6-MKIII Standard teaching & research flume
- S8-MKII – Sediment Transport Demonstration Channel
- S10 – Rainfall Hydrographs
- S11 – Ground Water Flow Unit
- S12-MKII-50 – Advanced Environmental Hydrology System
- S16 – Hydraulic Flow Demonstrator
- S17 – River Flow Simulator
- S60/S80/S100 – Standard teaching and research flumes
- FEL2 – Soil/Water Model Tank
- FEL3 – Rainfall Simulator
- SV Series - Statics & Vibrations
- SD-1.63 – Single Epicyclic Gear Train
- SD-1.62 – Gear Assembly Unit Combined Drives
- SD-1.61 – Governor Apparatus
- SD-1.60 – Static & Dynamic Balancing Apparatus
- SD-1.59 Disc Brake Apparatus
- SD3 – Torsional Vibration Apparatus
- SD2 – Universal Vibration System
- SD-1.58 – Relation Between Angular and Linear Speeds
- SD-1.57 – Castor, Camber and King Pin Inclination
- SD-1.56 – Epicyclic Gear Train
- SD-1.55 – Simple Flywheel
- SD-1.54 – Cam and Follower Apparatus
- SD-1.53 – Gear Tooth Form Apparatus
- SD-1.52 – Efficiency of Screw Threads
- SD-1.51 – Wheel and Differential Axle Apparatus
- SD-1.50 – Wheel and Axle
- SV101 – Structures Interface Unit
- SV100 – Bench Mounted Frame
- SV200 – Pin-Jointed Frameworks (Roof and Warren Truss)
- SV201 – Forces in a Truss and Redundant Truss
- SV202 – Deflection of Trusses
- SV300 – Combined Shear Force and Bending Moment Apparatus
- SV301 – Shear Force in a Beam
- SV302 – Bending Moments in a Beam
- SV303 – Deflection of Beams and Cantilevers
- SV304 – Equilibrium of Forces
- SV305 – Suspension Cable
- SV306 – Bending Stress in a Beam
- SV400 – Simple Suspension Bridge
- SV401 – Deflection of a Frame
- SV402 – Suspended centre Span bridge
- SV403 – Three-Pinned Arch
- SV404 – Two-Pinned Arch
- SV405 – Semi Circular Arch
- SV500 – Continuous and Indeterminate Beams
- SV501 – Plastic Bending of Beams
- SV502 – Plastic Bending of Portals
- SV503 – Deflection of Curved Bars
- SV600 – Buckling of Struts
- SV601 – Unsymmetrical Bending and Shear
- SV602 – Torsion of Rods and Tubes
- SV800 Rotating Fatigue Machine
- SV801 – Unsymmetrical Cantilever Apparatus
- SV802 – Torsion Testing Machine 30Nm
- SV803 – Creep Testing Machine
- SV804 – Pendulum Impact Tester 25J Impact Energy
- SV805 – Universal Materials Tester 35kN
- SV807 – Torsion & Deflection Testing Apparatus
- SV808 – Extension of Springs Apparatus
- SV900 – Friction on an Inclined Plane
- TH Series – Thermodynamics
- UOP Series - Unit Operations
- UOP3 – Distillation Columns
- UOP4 MKII – Solid/Liquid Extraction Unit
- UOP5 MKII – Liquid / liquid Extraction Unit
- UOP6 MKII – Computer Controlled Water Cooling Tower
- UOP7-MKII – Gas Absorption Column
- UOP8-MkIIe – Computer Controlled Tray Dryer
- UOP10 – Laboratory steam generator
- UOP12 – Filtration Unit
- UOP14-MKII – Crystallisation unit
- UOP15 – Fixed Bed Adsorption Unit
- UOP30 – 3-Phase Horizontal Separator
- W Series - Water Treatment
- W1-MKII Flocculation Test Unit
- W2 MKII Sedimentation Studies Apparatus
- W3-MKII Permeability – Fluidisation Studies Apparatus
- W4 MKII Filterability Apparatus
- W5 MKII Deep Bed Filter Column
- W7 MKII Model Sedimentation Tank
- W8 Anaerobic Digester
- W9-MKII Ion Exchange Unit
- W10 MKII Aeration Unit
- W11 Aerobic Digester
- IFT Industrial Food Technology
- Armfield Beverages Equipment
- FT102XA – Carbonator, Filling and Capping
- FT174 – Modular Miniature Scale HTST/UHT Process System
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT64 Laboratory Process Chiller
- Armfield Dairy
- FT174 – Modular Miniature Scale HTST/UHT Process System
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT80 Tall Form Spray Dryer
- FT75 Laboratory Pasteuriser
- FT63 Laboratory Process Chiller
- FT43 Laboratory Pasteuriser
- FT31 – Fluidised Bed Dryer
- FT22 Rising Film Evaporator
- FT21 Butter Churn
- FT20 Cheese Vat & Cheese Making Accessories
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- Armfield Edible and Essential Oils
- Armfield Educational Food Technology
- FT102XA – Carbonator, Filling and Capping
- UOP10 – Laboratory steam generator
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT111X – Laboratory-Scale Rapid Extractor
- FT110DP Benchtop Rapid Extractor
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT80 Tall Form Spray Dryer
- FT75 Laboratory Pasteuriser
- FT68 Deodorising Unit
- FT67 Hydrogenation Unit
- FT66 Neutraliser/Washer/Bleacher
- FT63 Laboratory Process Chiller
- FT52 CIP Unit (Clean in Place)
- FT43 Laboratory Pasteuriser
- FT34MKII Contact Plate Freezer
- FT32 Laboratory Drum Dryer
- FT31 – Fluidised Bed Dryer
- FT30-MKIII Spray Dryer
- FT29 Batch Solvent Extraction and Desolventising Unit
- FT28 Oil Extraction Screw Press
- FT25XA Scraped Surface Heat Exchanger Series
- FT22 Rising Film Evaporator
- FT21 Butter Churn
- FT20 Cheese Vat & Cheese Making Accessories
- FT19 Autoclave
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT15 Disc Bowl Centrifuge
- FT14 Plate and Frame Filter Press
- FT5 Ribbon and Cone Blender
- FT2 Hammer/Beater Mill
- Armfield Flavours and Fragrances
- Armfield Ingredients
- Armfield Liquid Foods
- FT174 – Modular Miniature Scale HTST/UHT Process System
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT22 Rising Film Evaporator
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT15 Disc Bowl Centrifuge
- Armfield Nutraceuticals
- FT140X – Mixing vessels
- FT110DP Benchtop Rapid Extractor
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT52 CIP Unit (Clean in Place)
- FT32 Laboratory Drum Dryer
- FT31 – Fluidised Bed Dryer
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT5 Ribbon and Cone Blender
- Armfield Pharmaceuticals
- FT174 – Modular Miniature Scale HTST/UHT Process System
- FT140X – Mixing vessels
- FT110DP Benchtop Rapid Extractor
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT52 CIP Unit (Clean in Place)
- FT32 Laboratory Drum Dryer
- FT31 – Fluidised Bed Dryer
- FT30-MKIII Spray Dryer
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT14 Plate and Frame Filter Press
- IFT Series - Industrial Food Technology
- FT102XA – Carbonator, Filling and Capping
- FT174 – Modular Miniature Scale HTST/UHT Process System
- FT74XA HTST/UHT System
- FT140X – Mixing vessels
- FT111X – Laboratory-Scale Rapid Extractor
- FT110DP Benchtop Rapid Extractor
- FT94X HTST/UHT Mini Pilot System
- FT94LT HTST/UHT Mini Pilot System
- FT91 Homogenisation Sub-Systems
- FT90 Homogenisation Sub-Systems
- FT83XA Sterile Filling System
- FT80 Tall Form Spray Dryer
- FT75 Laboratory Pasteuriser
- FT68 Deodorising Unit
- FT67 Hydrogenation Unit
- FT66 Neutraliser/Washer/Bleacher
- FT64 Laboratory Process Chiller
- FT63 Laboratory Process Chiller
- FT52 CIP Unit (Clean in Place)
- FT43 Laboratory Pasteuriser
- FT34MKII Contact Plate Freezer
- FT32 Laboratory Drum Dryer
- FT31 – Fluidised Bed Dryer
- FT30-MKIII Spray Dryer
- FT29 Batch Solvent Extraction and Desolventising Unit
- FT28 Oil Extraction Screw Press
- FT25XA Scraped Surface Heat Exchanger Series
- FT22 Rising Film Evaporator
- FT21 Butter Churn
- FT20 Cheese Vat & Cheese Making Accessories
- FT19 Autoclave
- FT18-MKII Modular Cross Flow Filtration
- FT17 Cross Flow Membrane Filtration
- FT15 Disc Bowl Centrifuge
- FT14 Plate and Frame Filter Press
- FT5 Ribbon and Cone Blender
- FT2 Hammer/Beater Mill
- Armfield Beverages Equipment