Search Results for: video
We have produced a number of videos to help our customers get more information regarding Armfield’s range of specialist equipment.
Armfield’s Trial Laboratory is fully operational, using video calling for remote sessions and in-person trials now available. With recent technology upgrades, we have been able to run very successful trials on a wide variety of equipment and products. Armfield.com
The Armfield F1-38 Hele Shaw apparatus enables investigation into the principles of potential flow and enables modelling of appropriate physical systems.
It allows students to study various source and sink arrangements and look at flow around a variety of different shaped models.
The experiment plastic bending of beams allows the experimental investigation of how beams behave when placed under a vertical load that causes plastic bending.
This experiment has the following properties:
- Assembly of a simply supported, propped cantilever or encastre beam set-up
- 3 different beam specimens with additional spare beam kits available
- Load cell assembly for applying vertical loading
- Linear scale to measure the deflection of the beam at the point of loading
Supplied with Armfield structures software as standard
The experiment semi-circular arch allows the experimental investigation of the horizontal thrust observed when loads are applied to a semi-circular arch with hinges at each end of the arch.
The measurements taken can then also be used to validate calculated values for the horizontal thrust and deflections found using Castigliano’s Theorem.
This experiment has the following properties:
- Ability to show mechanical principles of semi-circular arches
- Both point loads and uniformly distributed loads (UDL) can be simulated
- Pivoting support capable of measuring horizontal thrust
Supplied with Armfield structures software as standard
The experiment suspension cable allows the experimental investigation of a cable free-hanging between 2 supports under its own dead-weight.
This experiment has the following properties:
- Roller chain to simulate flexible cable
- Up to 4kg of additional weight to simulate increased dead-weight of chain
- Adjustable roller supports
- Moveable vertical scale
The experiment deflection of beams and cantilevers allows the experimental investigation of the deflection of beams of different section sizes under different loads and types of support.
This experiment has the following properties:
- Assembly of multiple different beam experiments via 2 adjustable supports, point load weight hangers and UDL weight sleeves
- 3 different beam specimens of different section sizes and material
This exercise module has the following properties:
- Assembly of both a Determinate and Indeterminate Truss Framework via various length members, detent pins and joint hubs
- Quick and easy assembly of members via special detent pins and joint hubs
- Up to 10 members possible in one joint hub
- Loading unit with spindle drive and universal load cell for force measurement
- Members suitable for use with both trusses
CERa-MKII apparatus for investigation of mass transfer and gaseous diffusion has traditionally used a capillary tube in a hot water bath, with a travelling microscope used to measure the rate of diffusion over a period of time. Although capable of giving good results, this type of apparatus was not without its disadvantages, particularly ease of use.
Armfield have yet again introduced a radical alternative to the traditional methods, utilising the benefits of modern computer compatible microscopy, producing a novel system with a large number of benefits.
- The MKII version Features Electronic USB Microscope and auto sample time lapse imagery and Video
Armfield are monitoring the ongoing situation relating to the outbreak of Coronavirus and are not envisaging any disruption to the supply of goods at this time to our customers. In regards to IC&T and support services, we are adhering to UK guidelines and Government advice in relation to travel and movement of people and in More
Armfield’s Research Flume, designed by our engineers to carry out flood event studies, was installed earlier this year at Newcastle University’s Fluid Science Department. During the commissioning of this key research equipment footage was taken showing the capabilities on environmental research including areas such as leaky barriers, dams giving away, effect on structures and more. More
The Armfield Multi-purpose Teaching Flume has been specifically designed to demonstrate the principles of fluid mechanics when applied to engineering structures in open channel flow.
Note:
- The MKII version is supplied as an accessory to the F1-10 Hydraulics Bench and can be used with any recently supplied F1-10
- Available in 2.5m and 5.0m working section lengths
- Clear acrylic sides to give visibility of the working section
- A jacking system permits the slope of the channel bed to be adjusted between -1% and +3%
- Inlet tank with flow stilling arrangement
- Includes a Venturi, sharp and broad-crested weirs, 2 vernier level gauges, adjustable undershot weir and crump weir
- Wide range of other models available as accessories.
- Optional flow meter
- Comprehensive instruction manual
The Armfield S6-MKIII laboratory flow channel is one of the most important tools available to the hydraulics or civil engineer whether engaged in teaching basic principles or researching solutions to practical problems.
Many applications in fluid mechanics are associated with the flow of water through an open channel where the water has a free surface that is exposed to the air at atmospheric pressure.
The flumes are available in different lengths from 5 to 17.5 meters increasing in 2.5 meter increments. Armfield flumes are installed in educational and research establishments throughout the world.
The FT25XA range of miniature-scale scraped surface heat exchangers has built-in control and flexibility with a graphic representation of the process on the touch screen control panel.
The operator can choose the parameters required for any particular formulation, these include margarine, shortening and ice cream processes.
The FT25XA has a number of configurations according to the required use.
Armfield miniature-scale technology is well established at offering developers the opportunity to run small trials, which provide enough information to enable scale-up to larger plant with confidence.
The formulations go through similar physico-chemical changes as they would in production plant and real time data logging permits results to be recorded and repeated.
Here at Armfield we take your privacy seriously and we will only use your personal information to provide products and services you have requested from us. Our website address is: https://armfield.co.uk/. How We Collect Data Armfield uses a number of methods and technologies to gather data, such as: Business to business trade. Sales enquiries telephone. More