Great Britain and Northern Ireland

+44(0)1425 478781 [UK]

    Aerospace
    Agricultural
    Armfield Beverages Equipment
    Armfield Dairy
    Armfield Edible and Essential Oils
    Armfield Educational Food Technology
    Armfield Flavours and Fragrances
    Armfield Ingredients
    Armfield Liquid Foods
    Armfield Nutraceuticals
    Armfield Pharmaceuticals
    armSOFT Software F1-aBASIC
    BE Series - Biochemical Engineering
    BE1 Batch Enzyme Reactor
    BE2 Chromatography Unit
    BE3 Anaerobic Column Reactor
    BE4 Anaerobic Tank Reactor
    C Series - Advanced Fluid Mechanics
    C1-MKII - Compressible Flow Unit
    C10 - Laminar Flow Table
    C11 MkII - Pipe Networks
    C15 - Computer Controlled Subsonic Wind Tunnel
    C16 - Hydrogen Bubble Flow Visualisation System
    C2 - Subsonic Wind Tunnel
    C3-MKII - Multi-Pump Test Rig
    C30 – Subsonic Wind Tunnel
    C4-MKII - Multi-Purpose Teaching Flume
    C6-MKII-10 - Fluid Friction Measurements
    C7 MkII - Pipe Surge And Water Hammer Apparatus
    C9 - Flow Meter Demonstration Unit
    C9-MKII Flowmeter Demonstrator
    CA - armBUS Hardware/Software Control & Acquisition Systems
    CA - armSOFT Control & Acquisition
    CA Series - Control and Acquisition Systems
    CE Series - Chemical Engineering
    CEB-MKIII Transparent batch reactor
    CEK MKII - Fluid Mixing Studies
    CEL-MKII Fixed and Fluidised Bed Apparatus
    CEM-MKII Continuous stirred tank reactor (CSTR)
    CEN-MKII - Solids Handling Studies
    CEP-MKII - Stirred Tank Reactors in Series
    CEQ - Corrosion Studies Kit
    CERa-MKII - Gaseous Diffusion Coefficient Apparatus
    CERb - Liquid Diffusion Coefficient Apparatus
    CES - Wetted Wall Gas Absorption Column
    CET-MKII Tubular reactor
    CEU - Catalytic Reactors
    CEXC – Chemical Reactors Teaching Equipment - Service Unit
    CEY Laminar flow reactor
    CEZ Plug flow reactor
    Chemical
    Civil
    CM Series - Internal Combustion Engine
    CM11-MKII - Gasoline Engine
    CM12 - Automotive Diesel Engine
    CM14 Axial Flow Gas Turbine
    CM20 - Single-Cylinder Combustion Engine
    Discipline / Sectors
    Distance Learning and Remote Access
    DT-8.00 - Torsion of Bars Apparatus
    DT-8.01 - Strut Buckling Apparatus
    DT-8.02 Suspended Beam Apparatus
    DT-8.03 Two Hinged Arch Beam Apparatus
    DT-8.04 Portal Frame Apparatus
    DT-8.05 Deflection of Curved Bars Apparatus
    DT-8.06 Bending Moment & Shearing Force Apparatus
    DT-9.06 Geneva Stop
    DT-9.07 Oldham Coupling
    DT-9.08 Hooke's Joint
    DT-9.09 Cam & Follower
    DT-9.10 Gear Generation Apparatus
    Educational
    EF Series - Engineering Fundamentals
    EF-6.1 – Photovoltaic Energy
    EF-6.2 -Wind Energy
    EF-6.4 – Hydrogen Fuel Cell Technology
    EF-6.5 – Biomass Fuel Technology
    EF-6.6 – Battery Technology Kit
    EF-6.7 – Renewable Energy
    EF-WS Workstation
    EFK1-MKII Statics
    EFK2 Materials Testing Kit
    EFK3 Simple Machines Kit
    EFK4 Mechanisms Kit
    EFK5 Vibration, Friction & Energy
    EFK6 Engineering Fundamentals Complete Kit
    Environmental
    F1 Series Fluid Mechanics
    F1-10 Hydraulics Bench
    F1-11 - Dead Weight Pressure Gauge Calibrator
    F1-12 Hydrostatic Pressure
    F1-13-MKII Flow Over Weir
    F1-14 - Metacentric Height
    F1-15-MKII Bernoulli's Theorem Demonstration
    F1-16-MKII Impact of a Jet
    F1-17 Orifice and Free Jet Flow
    F1-17a Orifice Discharge
    F1-18 Energy Losses in Pipes
    F1-19 Flow Channel
    F1-20 - Osborne Reynolds Demonstration
    F1-21-MKII Flow Meter Demonstration
    F1-22 Energy Losses in Bends and Fittings
    F1-23 - Free and Forced Vortex
    F1-24 - Hydraulic Ram
    F1-25-MKII - Demonstration Pelton Turbine
    F1-27 - Centrifugal Pump Characteristics
    F1-28 - Cavitation Demonstration
    F1-29 - Fluid Statics and Manometry
    F1-30 Fluid properties apparatus
    F1-31 Pascal’s Apparatus
    F1-32 Francis Turbine
    F1-33 - Pitot Tube Demonstrator
    F1-35 Series and Parallel Pumps
    F1-38 Hele Shaw Apparatus
    F12 - Particle drag coefficients
    F4 - Precision Pressure Gauge Calibrator
    F5 - Osborne Reynolds’ Apparatus
    F6 - Air Flow Studies
    F9092 - Fluid Properties & Hydrostatics Bench
    FE Series - Irrigation Water Management
    FEL10 - Drain Permeameter
    FEL2 - Soil/Water Model Tank
    FEL3 - Rainfall Simulator
    FEL4 - Soil Moisture Suction Sand Table
    FEL5-MKII - Demonstration Infiltration Apparatus
    FEL6 - Demonstration Lysimeter
    FEX26-1/2/3 - Parshall Flumes
    FEX26-10 – Broad Crested Weir
    FEX26-11 – Crump Weir
    FEX26-4/5/6 - Washington State College (WSC) Flumes
    FEX26-7 - Thin Plate Weirs & Accessories
    FEX26-8 – Stilling Well and Depth Gauge
    FEX26-9 – Channel Section
    FEX40-3/4 – Sluice Gates
    FEX40-5/6/7 – Automatic Water Control Gates
    FM Series - Fans and Compressors
    FM40 - Centrifugal Fan Demonstration Unit
    FM51 - Series and Parrallel Pumps Demonstration
    FM52 - Gear Pump Demonstration Unit
    FM53 - Plunger Pump Demonstration Unit
    FM60 - Impulse Turbine
    FM61 - Reaction Turbine
    FM62-Pelton-Turbines
    FM63 – Propeller Turbine
    FM64 - Pump Test Accessory
    FS Series- Fluid Science
    FS-1.1 Fluid Science Flow Measurement
    FS-1.2 Energy Losses in Straight Pipes
    FS-1.3 Energy Losses in Bends
    FS-2.1 - Fluid Science Manometer - Inclined
    FS-2.2 - Fluid Science Manometer – U Tube
    FS-3.1 - Fluid Science Shell and Tube Heat
    FS-3.2 - Fluid Science Tubular Exchanger
    FS-3.3 - Fluid Science Cross Flow
    FS-3.4 - Fluid Science Plate
    FS-4.1 Fluid Science Fluidised Bed
    FS-5.1 Flow Visualisation
    FS-SU Fluid Science Service Unit
    FT Series - Educational Food Technology
    FT102LT - Carbonator Filler
    FT102X-FT104X Carbonator/Filler/Capper
    FT102XA
    FT110DP Rapid Extractor
    FT111X - Laboratory-Scale Rapid Extractor
    FT14 Plate and Frame Filter Press
    FT140X - Mixing vessels
    FT141 Multifunction Laboratory Mixer - FT142 Multifunction Laboratory Mixer UHT
    FT15 Disc Bowl Centrifuge
    FT17 Cross Flow Membrane Filtration
    FT174 HTST/UHT Process System
    FT174X - Modular Miniature Scale HTST/UHT Process System
    FT18 Modular Cross Flow Filtration
    FT19 Autoclave
    FT2 Hammer-Beater Mill
    FT20 Cheese Vat
    FT21/21A-Butter Churn and Butter Making Accessories
    FT22 Rising Film Evaporator
    FT25X Modular Scraped Surface Heat Exchanger Systems
    FT27 CentriPeel Centrifuge
    FT28 Oil Extraction Screw Press
    FT29 Batch Solvent Extraction and Desolventising Unit
    FT30-MKIII Spray Dryer
    FT31 Laboratory Fluid Bed Dryer
    FT32 Drum Dryer
    FT33MkII Vacuum Freeze Dryer
    FT34MKII Contact Plate Freezer
    FT36 Blast Freezer
    ft40
    FT43 Laboratory Pasteuriser
    FT5 Ribbon and Cone Blender
    FT51 Continuous In-line Deaerator
    FT52-CIP Unit
    FT63 Laboratory Process Chiller
    FT64 Laboratory Process Chiller
    FT66 Neutraliser/Washer/Bleacher
    FT67 Hydrogenation Unit
    FT68 Deodorising Unit
    FT74XA HTST/UHT System
    FT75 Laboratory Pasteuriser
    FT80/FT81 Tall Form Spray Dryer and Chiller
    FT83XA Sterile Filling System
    FT84-12 Microwave UHT add-on
    FT85 Sterile Vessel
    FT90 Homogenisation Sub-Systems
    FT91 Homogenisation SubSystem
    FT94LT HTST/UHT Mini Pilot System
    FT94X HTST/UHT Mini Pilot System
    Geology & Geography
    H Series - Hydraulic Instruments
    H1-10 H1-11 - Tripod Stand
    H1-7 – H1-8 - Digital Hook & Point Gauges
    H12 - Liquid Manometers & Meters
    H12-8 - Portable Pressure Meter
    H12-9 - Portable Pressure Meter
    H14/2 - Computer compatible manometer bank
    H30 Pitot Tubes
    H33/H33-10 - Propeller Velocity Flowmeter
    H40-MKII - Wave Probe System
    H41 - Laser PIV System
    HT Series - Computer Controlled Heat Exchange / Heat Transfer
    HT10X – Computer Controlled Heat Transfer Service Unit
    HT10X Service Unit And Heat Transfer Accessories
    HT10XC Computer Controlled Heat Transfer Teaching Equipment
    HT11 – Linear Heat Conduction
    HT11X – Linear Heat Conduction
    HT12 – Radial Heat Conduction
    HT12X – Radial Heat Conduction
    HT13 – Laws of Radiant Heat Transfer and Radiant Heat Exchange
    HT13X – Laws of Radiant Heat Transfer and Radiant Heat Exchange
    HT14 - Combined Convection and Radiation
    HT14X – Combined Convection and Radiation
    HT15 - Extended Surface Heat Exchanger
    HT15X – Extended Surface Heat Exchanger
    HT16 - Radiation Errors in Temperature Measurement
    HT16X – Radiation Errors in Temperature Measurement
    HT17 - Unsteady-State Heat Transfer
    HT17X – Unsteady-State Heat Transfer
    HT18C - Thermo-Electric Heat Pump
    HT18X – Thermo-Electric Heat Pump
    HT19C - Free and Forced Convection
    HT19X – Free and Forced Convection
    HT20 - Conductivity of Liquids and Gases
    HT20X – Conductivity of Liquids and Gases
    HT30X Service Unit Heat Exchange Accessories
    HT30X-Computer Controlled Heat Exchanger Service Unit
    HT30XC - Computer Controlled Heat Exchanger Service Module
    HT30XC Service Unit And Heat Transfer Accessories
    HT31 – Tubular Heat Exchanger
    HT31X-Tubular Heat Exchanger
    HT32 – Plate Heat Exchanger
    HT32X - Plate Heat Exchanger
    HT33 – Shell and Tube Heat Exchanger
    HT33X-Shell and Tube Heat Exchanger
    HT34 – Jacketed Vessel With Coil & Stirrer
    HT35 – Cross Flow Heat Exchanger
    HT36 – Extended Tubular Heat Exchanger
    HT37 – Extended Reconfigurable Heat Exchanger
    IFT Industrial Food Technology
    IFT Series - Industrial Food Technology
    MAM Series - Mechanical & Automotive Mechanisms
    Marine
    ME Series - Cutaway Pumps
    ME Series - Cutaway Valves
    ME Series - Machine Elements - Transparent Process Demonstrators
    ME Series - Machine Elements Series
    ME51 - Steam Turbines
    Mechanical
    NA Series - Naval Architecture
    PCT Series - Process Control Teaching System
    PCT23MKII - Process Plant Trainer
    PCT40 Range - Multi-function Process Control Teaching System
    PCT55 - Programmable Logic Controller
    PCT56 – Sensor Conditioning and Calibration Trainer
    PCT60 - Level Control
    PCT61 - Flow Control
    PCT62 - Temperature Control
    PCT63 - Pressure Control
    PCT64 – Servo Pendulum
    RA Series - Refrigeration & Air Conditioning
    RA1-MKII-Computer controlled vapour-compression refrigeration unit
    RA2 - Computer Controlled Air Conditioning Unit
    RA3 Recirculating Air Conditioning Unit
    RA4 - Air-Conditioning Training Unit
    RE Series - Renewable Energy
    RE10 - Photovoltaic Energy
    RE12 Wind Energy
    RE14 Fuel Cell Technology
    RE16 Thermal Energy
    RE18 Smart Grid Technology
    RE20 Biofuel
    RE22 Bio Energy
    RE24 Battery Technology
    S Series - Applied Hydraulics & Hydrology
    S Series - Hydraulics & Hydrology
    S Series - Research Flume
    S1 - Drainage and Seepage Tank
    S10 - Rainfall Hydrographs
    S11 - Ground Water Flow Unit
    S12 - Advanced Environmental Hydrology System
    S16 - Hydraulic Flow Demonstrator
    S17 - River Flow Simulator
    S2 - Mobile Bed and Flow Visualisation Tanks
    S28- Sediment Erosion Flume
    S6-MKIII Standard teaching & research flume
    S60-S80-S100 Standard teaching and research flumes
    S8-MKII - Sediment Transport Demonstration Channel
    SD-1.10 Universal Bench Mounted Frame
    SD-1.12 Drum Brake Apparatus
    SD-1.15 Gearbox Apparatus
    SD-1.16A Gearbox Apparatus
    SD-1.17 - Overdrive Apparatus
    SD-1.18 - Braking & Accelerating Forces Apparatus
    SD-1.20 - Belt Friction Apparatus
    SD-1.22 - Borg-Warner Automatic Transmission Simulator
    SD-1.23 Static & Dynamic Balancing Apparatus
    SD-1.24-Plate Clutch Apparatus
    SD-1.25-Disc Brake Apparatus
    SD-1.26 - Friction Apparatus
    SD-1.27-Simple Hydraulic System
    SD-1.28 Crank Mechanism
    SD-1.50 Wheel and Axle
    SD-1.51-Wheel and Differential Axle Apparatus
    SD-1.52-Efficiency of Screw Threads
    SD-1.53-Gear Tooth Form Apparatus
    SD-1.54-Cam and Follower Apparatus
    SD-1.55-Simple Flywheel
    SD-1.56-Epicyclic Gear Train
    SD-1.57-Castor Camber and King Pin Inclination
    SD-1.58-Relation Between Angular and Linear Speeds
    SD-1.59-Disc Brake Apparatus
    SD-1.60-Static & Dynamic Balancing Apparatus
    SD-1.61-Governor Apparatus
    SD-1.62-Gear Assembly Unit Combined Drives
    SD-1.63 Single Epicyclic Gear Train
    SD-3.11 - Unsymmetrical Cantilever Apparatus
    SD-3.12 Universal Strut Apparatus
    SD-3.13 Beam Deflection Apparatus
    SD-3.50 Thin Cylinder Apparatus
    SD-4.00 Twist & Bends Testing Machine
    SD-4.13 Simple Vibration Apparatus
    SD-4.13A Free & Forced Vibration Apparatus
    SD-4.14 - Torsional Oscillations Apparatus
    SD-4.15 Acceleration of geared systems
    SD-417/-1.18 Epicyclic Gear Units
    SD-5.12 - Simple Balancing Apparatus
    SD2 - Universal Vibration System
    SD2-Universal Vibration System
    SD3 - Torsional Vibration Apparatus
    ST Series - ST10/11 Structural Engineering
    ST Series - Structural Engineering
    SV - Friction
    SV - Strength of Materials
    SV - Structures Series
    SV - Theory of Machines
    SV - Vibrations
    SV Series - Statics & Vibrations
    SV100 - Bench Mounted Frame
    SV101 – Structures Interface Unit
    SV200 - Pin-Jointed Frameworks (Roof and Warren Truss)
    SV201 - Redundant Truss
    SV202 - Deflection of Trusses
    SV203 - Deflection of Trusses
    SV300 - Combined Shear Force and Bending Moment Apparatus
    SV301 - Shear Force in a Beam
    SV302 - Bending Moments in a Beam
    SV303 - Deflection of Beams and Cantilevers
    SV304 - Equilibrium of Forces
    SV305 - Suspension Cable
    SV306 - Bending Stress in a Beam
    SV400 - Simple Suspension Bridge
    SV401 - Deflection of a Frame
    SV402 - Suspended centre Span bridge
    SV403 - Three-Pinned Arch
    SV404 - Two-Pinned Arch
    SV405 - Semi Circular Arch
    SV500 - Continuous and Indeterminate Beams
    SV501 - Plastic Bending of Beams
    SV502 - Plastic Bending of Portals
    SV503 - Deflection of Curved Bars
    SV600 - Buckling of Struts
    SV601 - Unsymmetrical Bending and Shear
    SV602 - Torsion of Rods and Tubes
    SV602 - Torsion of Rods and Tubes
    SV800 Rotating Fatigue Machine
    SV801 Unsymmetrical Cantilever Apparatus
    SV802 Torsion Testing Machine 30Nm
    SV803 Creep Testing Machine
    SV804 Pendulum Impact Tester 25J Impact Energy
    SV805 Universal Materials Tester 35kN
    SV807 Torsion & Deflection Testing Apparatus
    SV808 Extension of Springs Apparatus
    SV900-Friction on an Inclined Plane
    SV901-Clutch Plate Friction Apparatus
    SV902-Pivot Friction Apparatus
    SV903 - Journal Friction Apparatus
    SV904 Bearing Friction Apparatus
    SV905 - Rope Belt Friction Apparatus
    SV906 - Friction of Belts Apparatus
    SV907 - Brake Drum Friction Apparatus
    TH Series – Thermodynamics
    TH1 - Temperature Measurement and Calibration
    TH2 - Pressure Measurement and Calibration
    TH3 - Saturation Pressure
    TH4 - Recycle Loops
    TH5 - Expansion Process of a Perfect Gas
    TH6 - Film and Dropwise Condensation Demonstration unit
    UOP Series - Unit Operations
    UOP10 - Laboratory steam generator
    UOP12 - Filtration Unit
    UOP14-MKII - Crystallisation unit
    UOP15 - Fixed Bed Adsorption Unit
    UOP20X - Computer Controlled Modular Evaporator Series
    UOP3 - Distillation Columns
    UOP30 - 3-Phase Horizontal Separator
    UOP4 MKII - Solid/Liquid Extraction Unit
    UOP5 MKII - LIQUID/LIQUID EXTRACTION UNIT
    UOP6 MKII - Computer Controlled Water Cooling Tower
    UOP7 MKII - Gas Absorption Column
    UOP8-MkIIe Computer Controlled Tray Dryer
    W Series - Water Treatment
    W1 Flocculation Test Unit
    W10 MKII Aeration Unit
    W11 Aerobic Digester
    W2 MKII Sedimentation Studies Apparatus
    W3 MKII Permeability - Fluidisation Studies Apparatus
    W4 MKII Filterability Apparatus
    W5 MKII Deep Bed Filter Column
    W7 MKII Model Sedimentation Tank
    W8 Anaerobic Digester
    W9 MKII Ion Exchange Unit